Uncategorized

Wireless Surround System for Your Television Our Tips and Reviews

With advancements in technology to home audio systems demanding more channels to implement better sound quality, cables are becoming more cumbersome than ever. Some systems on the market include seven speakers with a subwoofer, each of these requiring a cable back to the receiver. Unless the design of the system came with some forethought and the wiring was run through the walls during construction, your options at this point are to pay someone at a high price to run the cables for you or try your best to hide the wires inconspicuously. At this point, you have another possible option, buying a wireless surround sound system.


Wireless speaker systems work in two different ways; they are transmitted by RF or IF. Typically with both types, a transmitting device is connected to the output end of the audio source, and a built in or attached receiver is placed with the remote speakers. With RF, or radio frequency, different radio frequencies are used to transmit the audio data to the speakers. These systems work better of the two if you have a poor direct line of sight. Some materials however, can possibly absorb or interrupt the signal like metals and cement. With IF, or infrared, these wireless systems use light waves to transmit audio data to the individual speakers. With these systems, a direct line of sight is important, which makes smaller rooms better suited for this type. With the exception of glass, most solid materials will disrupt an IF signal. Your individual needs will guide you on which system to choose.


When you have installed your wireless surround system for tv in your tv room the sound will be awesome and you will get the feeling you are in a movie theater with the surround sound system. You and your family will enjoy watching and listening to the different sound effects that this system will offer.


Although a wireless surround sound system for tv has its advantages, there are a few drawback you should be aware about. In comparison to a wired system, the sound quality is less accurate. Additionally, there are a number of factors that can cause a breakdown of the transmitting signal, which results in poor sound quality. In addition, the further away the speaker must be placed, the more distorted the sound could possibly be. The selection of whether to use a wired, wireless, IF, or RF depends on your needs, and expectations of your system.

Editor's choice 2017
No Comments

    Leave a reply